Several methods to smooth stone surface

Polishing: Surface high gloss. Polishing may continue for a long time may not, mainly to see the type of stone. Granite, marble and limestone is often polished, and require different maintenance to maintain its luster.
    Finish: polished surface looks very "soft", scratch obvious to need much care. Marble, limestone and slate suitable for polished.
    Pickling: Surface with small traces of corrosion. Pickling surface scratches less than the polished surface is more pristine appearance. Most of the stones can be acid, but the most common are marble and limestone. Pickling is a way to soften the shiny granite.
    Ax: the surface is not smooth. After the initial cut, the stone for further processing to remove obvious saw marks, but its effects reach the finish after the results. Granite, marble and limestone can be handled, usually in a custom case.
    Fire: a rough surface. This surface is mainly used for interior such as floor finishes or commercial buildings, higher labor costs. Heated to high temperatures to form a rapid cooling after the fire surface. Burning surface is usually granite.
    Cracking: surface roughness, but not as rough fire. This surface treatment is usually cut by hand or in the mining of natural stone chisel to expose the crack surface. This surface treatment is mainly used for slate.
    Roll: the surface smooth or slightly rough, like the corners smooth and was broken. There are several ways to achieve the rollover effect. 20 mm blocks can be in the machine rolling, rolling 3 cm tiles can also be processed, and then split into two bricks. Marble and limestone is the material of choice for roll handling.
    Scrub: Surface old. Scrub stone surface treatment process is to mimic natural wear and tear stone effect.